Citizen Systems PD-24 - Manual (Page 40)

40
Printer Settings
Remarks
Selects the QR Code
separation function: Mode 1
where the user separates the
data and Mode 2 where the
printer separates the data.
Sets the time until energy
saving starts. Or it can be set
to invalid.
Function that cancels auto
power off, during infrared
linking.
Sets black mark detection
printing.
If this setting is valid, a
response is sent to the FSg of
the ESC command and to the
ESC
∼
Y command (command to
return the status of the printer
to the host).
If the printer is a Bluetooth
version, the Bluetooth interface
is selected in the factory.
When set to Valid, the serial
interface will take priority when
the cable is connected and the
printer power is ON.
Selects communication speed.
(Valid only for RS232C
interface.)
Sets the data length.
(Valid only for RS232C interface.)
Sets the parity.
(Valid only for RS232C interface.)
Sub Menu
QR division mode
Low power time
Link off * 1
Black mark
detection
Return control
Interface selected
Cable IF auto
detection
Cable IF baudrate
Cable IF data
length
Cable IF parity
Initial values
mode 1
3 min
Invalid
Invalid
Invalid
IrDA
Bluetooth*
Valid
9600
8 bit
None
Setting range
mode 1
mode 2
3 min
5 min
10 min
Invalid
Invalid
Valid
Invalid
Valid
Invalid
Valid
Bluetooth
Cable IF
IrDA (Infrared Standard)
IrCZ (Infrared Citizen)
USB
Invalid
Valid
9600
19200
38400
115200
4800
8 bit
7 bit
None
Odd
Even
Top Menu
Printer
Settings
System
settings
Interface
settings
Setting the Modes