Citizen Systems PD-24 - Manual (Page 26)

26
Printer Preparation
Loading Roll Paper
1
Turn on the printer power and
push the cover open buttons
with both hands to open the
roll paper cover.
2
Load the roll paper by aligning
one edge of it against a paper
holder as shown in the figure
then pushing it lightly.
3
After pulling the end of the roll
paper towards you, push the
cover close locations with both
hands to close the roll paper
cover.
Pull the roll paper straight to prevent
looseness. Looseness causes paper jams.
If the cover is open, a cover open error (ERROR LED flashes) occurs. (see
Page 17)
When this happens firmly close the roll paper cover again.
The error is automatically cancelled.
Cover open
button
Cover open
button
Paper
holder
Paper
holder
Loading the Paper