Citizen Systems PD-24 - Manual (Page 38)

38
Printer Settings
7
Setting contents printing
example
7
Setting change procedure
printing example
YES
NO
YES
NO
YES
YES
YES
YES
YES
YES
Do you want to change the settings?
YES(M) NO (F)
Printer settings
YES (M) NO (F) EXIT (M+F)
: Media type Thermal media
YES (M) NO (F)
: Media type Copy thermal media
YES (M) NO (F)
: Print density ±0
YES (M) NO (F)
: Print density -2
YES (M) NO (F)
: Print pitch 10cpi
YES (M) NO (F)
: Font style Roman
YES (M) NO (F)
: Character set Italic
YES (M) NO (F)
: International character USA
YES (M) NO (F)
: Code page USA
YES (M) NO (F)
CITIZEN PD24 VuePrint Menu System
Press 'MENU' for Yes.
Press 'FEED' for No.
Press 'MENU' and 'FEED' together for Exit
New settings are NOT saved until you finish and
exit the menu system and choose the 'save settings
as default' option
Do you want to print out the default settings?
YES(M) NO (F)
CITIZEN PD24 CURRENT Configuration
ROM version : CP1X-XXXX 20XX-XX-XX
Boot version : CPBT-XXXX 20XX-XX-XX
Firmware version : CPXX-XXXX 20XX-XX-XX
Font version : CPXX-XXXX 20XX-XX-XX
Interface selected : Bluetooth & Cable Select
Bluetooth address : XX:XX:XX:XX:XX:XX
Bluetooth version : X. X-XX
: Printer settings
Media type Thermal media
Print density +/–0
Print pitch 10 cpi
Font style Roman
Character set Italic
International character USA
Code page USA
QR division mode mode 1
: System settings
Low power time 3 min
Link off Invalid
Black mark detection Invalid
Return control Invalid
:Interface settings
Interface delected Bluetooth
Cable IF auto detection valid
Cable IF baudrate 9600
Cable IF data length 8 bit
Cable IF parity None
Cable IF stop bit 1 bit
Cable IF flow control Xon/Xoff
IrCZ baudrate 9600
IrCZ stop bit 1 bit
Bluetooth Mode Normal(no pin code)
BOND history deletiion Invalid
Do you want to reset the printer to factory defaults?
Are you sure? Press YES for 3 seconds.
YES(M) NO (F)
Setting the Modes