Hunter PRO-C (PCC) - Manual (Page 3)

3
Specifications
Operating Specifications
• Station Run Time: 1 minute to 6 hours on programs
A, B, and C
• Start Times: 4 per day, per program, for up to 12 daily starts
• Watering Schedule: 7-day calendar, interval watering up
to a 31-day interval or true odd or even day programming,
made possible by the 365-day clock/calendar
Electrical Specifications
• Transformer Input: 120 VAC, 60 hz
(230 VAC, 50/60 hz International Use)
• Transformer Output: 24 VAC, 1 Amp
• Station Output: 24 VAC, 0.56 amps per station
• Maximum Output: 24 VAC, 0.84 amps
(includes Master Valve Circuit)
• Battery: 9-volt alkaline battery (not included) used
only for non-AC programming, the non-volatile memory
maintains program information
• Battery, front panel, internal CR2032 Lithium for
real-time clock
Cabinet Dimensions
Height: 9" (23 cm)
Width: 10" (21.5 cm)
Depth: 4.5" (10.9 cm)
Outdoor cabinet is NEMA 3R, IP44 rated.
Default Settings
All stations are set to zero run time. This controller has a
non-volatile memory that retains all entered program data
even during power outages, without need for a battery.
Cleaning
Clean only with cloth dampened with mild soapy water.
Introduction and Installation
Specifications