Hunter PRO-C (PCC) - Manual (Page 2)

Table of Contents
Introduction and Installation
3 Specifications
4 Pro-C Components
8 Mounting the Controller to a Wall
9 Connecting AC Power
10 Installing Station Modules
11 Connecting Station Wires
12 Connecting the Battery
13 Connecting a Master Valve
14 Connecting a Pump Start Relay
15 Connecting a Hunter “Clik” Weather Sensor
17 Connecting a Hunter Remote
19 Connecting to the Hunter Solar Sync
®
Programming the Controller
20 Setting the Current Date and Time
21 Setting Program Start Times
22 Setting Station Run Times (Length of Watering
for Each Area)
23 Setting a Watering Schedule
25 Options for Running Your Irrigation System
27 Using the Pro-C to Operate Outdoor Lighting
Advanced Features
29 Set Pump/Master Valve Operation
29 Programmable Rain Off
29 Setting Specific Days Off
Hidden Features
30 Program Customization
30 Programmable Delay Between Stations
31 Programmable Sensor Override
32 Total Run Time Calculator
32 Easy Retrieve™ Program Memory
33 Solar Sync Delay
34 Cycle and Soak
36 Hunter Quick Check™
36 Clearing Controller’s Memory/Resetting Controller
36 Winterizing Your Irrigation System
Troubleshooting Guide
37 Problems, Causes and Solutions
Quick Check and Easy Retrieve are trademarks of Hunter Industries, Inc.
Pro-C, Solar Sync, Rain-Clik, Freeze-Clik and SmartPort are registered trademarks of
Hunter Industries, Inc.