Hunter PRO-C (PCC) - Manual (Page 27)

27
Using the Pro-C to Operate Outdoor Lighting
(optional)
Connecting the FX Transformer
The Pro-C is capable of operating three separate lighting
transformers equipped with the PXSync interface box.
Connect wires from the first PXSync box to station output 1
(and the Common) on the Pro-C terminal. If using a second or
third transformer, the second will be wired to station 2 and the
third wil be wired to station 3.
NOTE
Manual cycles initiated at the controller or from a remote will
cancel any automatic program currently running. Once manual
cycle is complete, the controller will return to automatic mode,
and run the next scheduled program at its specified start time.
Using the Pro-C to Operate Outdoor Lighting
Common
Sta
tion O
utput
Transformer
Accessory Plug