Hunter PRO-C (PCC) - Manual (Page 24)

24
Selecting Interval Watering
This feature is convenient if you want to have a more consistent
watering schedule without having to worry about the day of the
week or the date. The interval you select is the amount of days
between watering including the watering day.
1. Turn the dial to the WATER DAYS position. The water drop
above Monday should be flashing.
2. Press the i button until EVEN is flashing, then press the i
button one more time. The display will change to the interval
mode and the Interval Day number will be flashing.
3. Press the j button. The display will now show two numbers:
the interval, and the days remaining in the interval.
4. The number of days between waterings, or the interval, will
be flashing. Use the j and k buttons to select the number
of days desired between waterings.
5. Press the i button. The days remaining in the interval are
now flashing. Use the j and k buttons to select the number
of days until the next desired watering. One day remaining
means it will water the next day.
NOTE
If any days are selected as non-water days W at the bottom of
the display, the Interval Day watering will exclude those days.
For example, if the Interval Days are set at 5 and Monday is a
non-water day, the controller will water every 5th day, but never
on a Monday. If the interval water day falls on a Monday and
Monday is a non-water day, the program would not water for
5 more days resulting in no irrigation for 10 days total.
Setting a Watering Schedule
(continued)