Motorola sb6120 - Manual (Page 21)

2 INSTALLATION
13
Configuring TCP/IP
Make sure all client computers are configured for TCP/IP, which is a protocol for
communication between computers. Perform one of the following for the operating
system you are running:
•
Configuring TCP/IP in Windows 2000
•
Configuring TCP/IP in Windows XP
•
Configuring TCP/IP in Windows Vista
• For Macintosh or UNIX systems, follow the instructions in the applicable
Macintosh or UNIX user documentation.
After configuring TCP/IP on your computer, you must verify the IP address. Perform
one of the following:
•
Verifying the IP Address in Windows 2000 or Windows XP
•
Verifying the IP Address in Windows Vista
• For Macintosh or UNIX systems, follow the instructions in the applicable
Macintosh or UNIX user documentation.
Configuring TCP/IP in Windows 2000
1. Select Control Panel from either the Windows Start menu or Windows Desktop
to display the Control Panel window.
2. Double-click Network and Dial-up Connections to display the Network and Dial-up
Connections window.