Cabling and startup for the sb6120 – Motorola sb6120 User Manual
Page 16
2 INSTALLATION
8
You can use any web browser, such as Microsoft Internet Explorer
®
, Netscape
Navigator
®
, or Mozilla
®
Firefox
®
with the SB6120.
The following operating systems are not supported by the SB6120. Microsoft
support for these products has ended:
• Windows
®
95
• Windows
®
98
• Windows
®
98 SE
• Windows
®
Me
• Windows NT
®
Cabling and Startup for the SB6120
Be sure your computer is on and the cable modem is unplugged.
1. Connect one end of the coaxial cable to the cable outlet or splitter.
2. Connect the other end of the coaxial cable to the CABLE connector on the cable
modem. Hand-tighten the connectors to avoid damaging them.
3. Plug the power adapter cord into the +12VDC connector on the cable modem
and the electrical outlet.
4. Plug the power cord into the electrical outlet. This turns on the SB6120. You do
not need to unplug it when not in use. The first time you plug in the SB6120,
allow it 5 to 30 minutes to find and lock on the appropriate communications
channels.
5. Connect the provided Ethernet cable to the Ethernet connector on the cable
modem. Connect the other end to the Ethernet port on your computer.