To remove mower (see fly. 15), To install mower (see fig. 15), Tractor – Poulan 169553 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
and
A
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
»
ijeoress ciutch/brake pedal fully and set parking brake.
•
Place gearshift lever in neutral (N) position.
•
Place attachment clutch in “DISENGAGED" position.
•
Turn igmtion key ' OFF*' and remove key
•
Make sure the
blades and
all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where >♦ car-not come in
i
ontact «itn
plug.
TRACTOR
TO REMOVE MOWER (See Fly. 15)
Mowerwill be easierto remove from the right
side
of tractor.
Place attachment clutch in “DISENGAGED” position.
Move attachment lift leverforward to lower mower to its
lowest position.
Roll belt off engine pulley.
Disconnect clutch rod from clutch lever by removing
retainer spring.
Disconnect anti-sway bar from chassis bracket by
removing retainerspring.
Disconnect suspension arms from rear deck brackets
by removing retainer springs.
Disconnect front links from deck by removing retainer
springs.
Raise lift lever to raise suspension arms. Slide mower
out from under tractor.
IMPORTANT: IF AN ATTACHMENT OTHER THAN
THE MOWER IS TO BE MOUNTED TO THE
TRACTOR, REMOVE THE FRONT LINKS.
TO INSTALL MOWER (See Fig. 15)
•
Raise attachment lift lever to its highest position.
•
Slide mower under tractor with discharge guard to right
side of tractor.
•
Lower lift lever to its lowest position.
•
Install mower in reverse order of removal instructions.
18