MTD 112-530A User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BLADE IDLER BRACKET ASSEMBLY DETAIL

Brake Shoe 754-0647

Rivet 728-0649

Idler Bracket Assembly 12278

BELT WEAR

Belt clips improperly positioned will cause
premature belt wear. The belt clip must complete
ly clear the belt when the belt is tightened. It
should also assist in freeing the belt from the
blade spindle pulley when the belt is loose. This
may be checked by removing the blade spindle
cover.

Idler Bearing 756-0199

Hex Lock Nut

712-0262

Beit Ciip

04563

NOTE

The use of any accessory on this rotary mower

other than those manufactured by the mower
manufacturer is not recommended.

GRASS CATCHER Model 004 is available as optional equipment for the

mower shown in this manual.

WARNING }

1. The mower should not be operated without the entire grass catcher

or chute deflector in place.

2. The mower should not be operated without the protective shield on

the rear of the deck in place.

NOTE

Under normal usage bag material is subject to wear and should be
checked periodically. Be sure any replacement bag complies with the

mower manufacturer’s recommendations.

For replacement bags, use only factory authorized replacement bag No.

764-0176.