A message to arlens parts manual user, Introduction – Ariens SNO-THRO 924 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

A Message to Arlens Parts Manual User
Your Ariens Dealer will be happy to supply any
service or advice which may be required to keep
your Ariens equipment operating at peak efficiency.
He stocks genuine Ariens parts and lubricants;
manufactured with the same precision and skill
as the original equipment His factory trained staff
is kept well informed on the best methods of
servicing Ariens equipment and is ready and able to
service you. If engine repairs or services are required,
they can be obtained from an Ariens Dealer or from
an authorized engine manufacturer's service center.
If service is required, be prepared to supply the
service person with the Model Number and Serial
Number of the equipment and engine, as well as a
full description of the problem encountered.
Introduction
The information contained here in is intended for
use by Ariens Dealer's trained servicemen and serves
as a supplement to and reminder of training sessions
conducted by Ariens Company. Before you attempt
any repair, adjustment or maintenance project, be
certain that you have read and fully understand the
instructions in your Owner's and Repair Manuals.
Understand and follow each Danger, Warning,
Caution and all instructions exactly as given. Also be
sure that you have all tools, replacement parts and
other materials required to complete the project.
A network of Ariens Dealers and Distributors is
maintained in order to assure you of an adequate
suppiy of replacement parts and technical assistance.
Your local Ariens Dealer is required to order parts
thru his distributor. When replacement parts are
required, use only genuine Ariens parts. Failure to
do so may result in product malfunction and pos
sible injury to operator and/or bystander. NOTE:
All references to "Left", "Right", "Front" and
"Rear" are given from operators position.
NOTE: The descriptions and specifications con
tained in this manual were in effect at the time the
manual was approved for printing. Ariens Company
reserves the right to discontinue models without
notice and without incurring obligation. The equip
ment described within this manual may not be
identified as either standard or optional and the
various illustrations may not all be applicable to (
your particular unit. If you have questions, always
check with your Ariens Dealer.
^
NOTE TO ARIENS DEALERS: Refer to your
current Parts Price List for suggested parts stock
ing. Service training for dealers is available at the
Ariens Service School. See your Ariens Distributor
for the latest school schedule.