Ariens 927065 User Manual
Rear-engine rider
Table of contents
Document Outline
- TABLE OF CONTENTS
- 1.1 THE MANUAL
- 1.2 MODEL AND SERIAL NUMBERS
- 1.3 PRODUCT REGISTRATION
- 1.4 UNAUTHORIZED REPLACEMENT PARTS
- 1.5 DISCLAIMER
- 2.1 SAFETY ALERTS
- 2.2 SIGNAL WORDS
- 2.3 NOTATIONS
- 2.4 SAFETY RULES
- 2.5 SERVICE POSITION
- 2.6 CLEANING AND STORAGE
- 2.7 MOVING THE UNIT MANUALLY
- 4.1 CONTROLS AND FEATURES
- 4.2 SAFETY INTERLOCK SYSTEM
- 4.3 FILLING FUEL TANK
- 4.4 GENERAL LUBRICATION
- 4.5 REMOVE AND INSTALL 28 AND 32- INCH MOWER DECK
- Remove (Figure 6)
- Install
- 4.7 MOWER DECK PITCH ADJUSTMENT
- 4.8 REMOVE AND INSTALL 40-INCH MOWER DECK
- 4.9 LEVELING THE 40-INCH MOWER DECK
- 4.10 ADJUST LEVEL OF MOWER DECK
- 4.11 MOWER HEIGHT ADJUSTMENT
- 4.12 ANTISCALP ROLLER ADJUSTMENT
- 4.13 TRANSMISSION NEUTRAL ADJUSTMENTS
- i
- « i
- 5-18
- 5.2 CHECKING ENGINE OIL
- 5.3 CHANGING OIL
- 5.4 CHECKING ENGINE COOLING
- 5.5 CLEANINGTHE AIR CLEANER
- 5.6 CHANGING THE AIR CLEANER ELEMENT
- 5.7 INSPECT MUFFLER/SPARK ARRESTER
- 5.8 REPLACE SPARK PLUGS
- 5.9 ENGINE REMOVAL
- 5.10 ENGINE INSTALLATION
- 6.1 HYDRO TRANSMISSION TROUBLESHOOTING
- 6.2 TRANSAXLE FLUID RECOMMENDATIONS
- 6.3 HYDROSTATIC BELT REPLACEMENT
- 6.4 REMOVE TRANSMISSION
- 6.5 INSTALL TRANSMISSION
- 7.1 PTO BELT REPLACEMENT Remove
- Install
- 7.2 MOWER BELT REPLACEMENT - 40- INCH DECK (927064)
- Remove (Figure 21)
- IP
- 7.3 MOWER BLADE REPLACEMENT
- 7.4 ELECTRIC CLUTCH - 28 AND 32-INCH MOWER DECKS
- 7.5 28 AND 32-INCH MOWER SPINDLE REPAIR
- 7.6 40-INCH MOWER SPINDLE REPAIR
- 7.7 40-INCH MOWER REPLACE THE ELECTRIC CLUTCH (FIGURE 25)
- Remove
- Install
- 7.8 40-INCH MOWER REPLACE CLUTCH SPINDLE BEARINGS
- 8.1 FUEL SYSTEM TROUBLESHOOTING
- 8.2 FUEL TANK REMOVAL
- 9.1 STEERING
- 9.2 REPLACE STEERING PINION AND GEAR (FIGURE 27)
- Remove
- Install
- 10.1 TOOLS
- 10.2 ELECTRICAL MEASUREMENTS
- Multimeter
- Analog Meters
- Digital Meters
- Voltage Measurement
- Current Measurement
- Resistat^e Measurement
- 10.3 BATTERY
- Battery Electrolyte First Aid
- Inspection, Cleaning, Drying, and Maintenance
- Electrolyte Level
- Battery Charger
- Charging A New Battery
- Specific Gravity Check
- 10.4 SWITCHES
- Jump Starting
- Storage
- Normally Open Switch
- Normally Closed Switch
- Ignition Switch
- 10.5 SOLENOID AND RELAYS
- 10.6 FUSES
- 10.7 DIODES AND RECTIFIERS
- #
- fi