1 safety alerts, 2 signal words, 3 notations – Ariens 927065 User Manual
Page 4: 4 safety rules, 1 safety alerts -4, 2 signal words -4, 3 notations -4, 4 safety rules -4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2 - SAFETY
WARNING:
This cutting machine is capable of
amputating hands and feet and throwing
objects. Failure to observe the safety
instructions in the manuals and on decals could
result in serious injury or death.
Slopes are a major factor related to loss-of-
control and tip-over accidents. Operation on all
slopes requires extra caution.
Tragic accidents can occur if the operator is not
alert to the presence of children. Never assume
that children will remain where you last saw
tf^m.
Gasoline is extremely flammable and the vapors
are explosive, handle with care.
Disengage attachment, stop unit and engine,
remove key, engage parking brake, and allow
moving parts to stop before leaving operator’s
position.
A
OL1253
A
2.1 SAFETY ALERTS
These are safety alert symbols. They
mean:
•ATTENTION!
•YOUR SAFETY IS INVOLVED!
When you see this symbol:
•BECOME ALERT!
•OBEYTHE MESSAGE!
2.2 SIGNAL WORDS
The safety alert symbols above and signal words below
are used on decals and in this manual.
Read and understand all safety messages.
DANGER:
IMMINENTLY HAZARDOUS
SITUATION! If not avoided, WILL RESULT in
death or serious injury.
WARNING:
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, COULD RESULT in
death or serious injury.
CAUTION:
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, MAY RESULT in
minor or moderate injury. It may also be used to
alert against unsafe practices.
2.3 NOTATIONS
NOTE:
General reference information for proper opera
tion and maintenance practices.
IMPORTANT:
Specific procedures or information
required to prevent damage to unit or attachment.
2.4 SAFETY RULES
If unit is to be used by someone other than original
purchaser; loaned, rented or sold, ALWAYS provide
this manual and any needed safety training before
operation.
Read, understand, and follow all safety practices in
Owner/Operator Manual before assembling, using or
working on this mower.
ALWAYS remove key from ignition and wire from spark
plug before assembly, or working on this unit.
Inspect unit before each use for: missing or damaged
decals and shields, correctly operating safety interlock
system, and deterioration of grass catchers. Replace or
repair as needed.
ALWAYS check overhead and side clearances carefully
before operation. ALWAYS be aware of traffic when
crossing or operating along streets or curbs.
Keep children, people, and pets away. Be alert and
shut off unit if anyone enters work area. Keep children
under watchful care of a responsible adult.
NEVER allow children to operate or play on or near
unit.
Keep area of operation clear of all toys, and debris.
Thrown objects can cause injury.
Stay alert for hidden hazards, holes, and ruts.
Avoid uneven or rough terrain. DO NOT operate near
drop offs, ditches, or embankments. Unit can suddenly
turn over if a wheel is over the edge of a cliff or ditch, or
if an edge caves in.
Dust, fog, etc. can reduce vision and cause an
accident. Operate unit only when there is good visibility
and light.
Data indicates that operators, age 60 and above, are
involved in a larger percentage of riding mower related
injuries. These operators should evaluate their ability to
operate the riding mower safely enough to protect
themselves and others from serious injury.
Only trained adults may operate unit. Training includes
being familiar with controls and actual operation.
NEVER operate unit after or during the use of
medication, drugs or alcohol.
NEVER allow anyone to operate this unit when their
alertness or coordination is impaired.
2 - 4