1 pto belt replacement remove, Install, 2 mower belt replacement - 40- inch deck (927064) – Ariens 927065 User Manual
Page 24: Remove (figure 21), 1 pto belt replacement -24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 7 - MOWER DECK
7.1 PTO BELT REPLACEMENT
Remove
1. Lower mower deck to the ground.
CAUTION:
Use care when releasing idler
spring tension. Keep body parts well away
from idler when performing this operation.
2. Pull idler towards the outside of the unit and
remove PTO belt from idler.
3. Remove PTO belt from mower deck pulley and
engine^heave.
Install
1. Install PTO belt on engine sheave and mower deck
pulley.
2. Pull idler towards the outside of the unit and place
PTO belt on idler.
3. Slowly release idler until PTO belt rests firmly
against idler.
1. Idler Spring
2. Idler Pulley
Figure 20
7.2 MOWER BELT REPLACEMENT - 40-
INCH DECK (927064)
1. Right Pulley
5. Left Pulley
2. Idler
6. Clutch
3. Idler Spring
7. Front Bracket
4. Mower Belt
8. Clutch Bracket
9. Mower Deck
Figure 21
Remove (Figure 21)
1. Remove mower deck (see
Remove and Install 40
Inch Mower Deck).
A
CAUTION:
Use care when releasing idler
spring tension. Keep body parts well away
from idler when performing this operation.
2. Remove idler spring.
3. Remove front bracket and clutch bracket.
4. Remove mower belt.
IP
7 - 2 4