Trouble shooting, Belt cross reference – Ariens PRM-10000 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLE SHOOTING
MODEL
TYPE OF FAILURE
CAUSE
SOLUTION
1) 1972
8H.P.
SNO-THRO
72061 Drive Belt Breaking.
72061 Glass cord belt not
recommended for winter use.
Replace with 72072 drive belt.
2) ALL
SNO-
THROS
Gear Case failure.
Rakes frozen to shaft, due to
lack of lubrication. Rake tube
out of round.
Pinion shaft too soft, or too
hard.
Free shafts,
Repair gear case.
Ream rake tube, grease and
replace rakes.
Replace pinion shaft.
3)
Jaw
couplings
breaking
through.
Improper heat treating.
Replace.
4)
Noisy jaw couplings.
Out of alignment.
Re-align by adjusting tabs on
attachment of file slots in low
er brackets that hook on cross
rod.
5)
Blower fan bending.
Flard snow, or ice, gravel,
stones.
Straighten or replace with new
style 10178 fan.
6) 910018
910019
910020
Friction wheel.
Misadjusted.
Install 510022 adjustment link.
See page 41, paragraph 12.
BELT CROSS REFERENCE
YEAR
HP
DRIVE
XNO.
1972
8HP
72072
1968-72
5, 6, 7 HP
72047
1966-67
5, 6, 7 HP
72047
34x104
1965-67
4HP
72089
34x89
1964-65
6HP
72047
34x88
1962-63
6HP
72047
34x88
3V2 HP
72089
34x89
Page 45