Zig-zag stitch #3, Recommended settings, Seam finishing – SINGER 6212 User Manual
Page 24: Satin stitching, Block monogramming, Zig-zag stitch, Seam finishing satin stitching
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ZIG-ZAG STITCH #3
The Zig-Zag Stitch can be used when sewing seams, appliqueing, monogramming
or decorating.
RECOMMENDED SETTINGS
Stitch Selection: Zig-Zag Stitch #3
Needle Position:
,
Stitch Width:
Stitch Length: 2-4
Foot: Special Purpose (J)
Needle Plate: General Purpose (A)
Seam finishing
Use a zig-zag stitch to finish seam
edges of fabrics that are likely to
unravel.
• Sew seams as desired; trim and
press open.
• Place edge of seam allowance under
foot, as shown.
• Stitch close to edge, letting outer zig
zag fall over edge.
Satin stitching
RECOMMENDED SETTINGS
Stitch Selection: Zig-Zag Stitch #3
Needle Position:
I I g
stitch Width:
Stitch Length: 0-2
Foot: Special Purpose (J)
Needle Plate: General Purpose (A)
Satin stitching is a series of closely
spaced zig-zag stitches. Satin stitch
m o n o g r a m s , e m b r o i d e r y a n d
appliques for a smooth, satin-like
finish.
• P r a c t i c e to g e t desired stitch
appearance.
Block monogramming
• Lightly trace letters on right side of
fabric.
• Center tracing under needle.
• Stitch entire outline, leaving needle
in fabric when turning.
• Pull threads to wrong side of fabric,
tie and trim.
22