Cleaning your machine, Removing bobbin case, Replacing bobbin case – SINGER 6105 User Manual
Page 40: Chapter 10. caring for, Your machine
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 10. Caring For
Your Machine
CLEANING YOUR MACHINE
CAUTION: Before cleaning your machine, d/s-
connect
power
line
plug
from
your
socket
outlet.
With a soft cloth or lint brush, clean all points
indicated
by
arrows,
especially
the
bobbin
case area and feed. Also, clean exposed parts.
If necessary a mild solution of soap and water
may be used to remove stubborn stains. No
other
cleaning
liquid
or
powder
should
be
used.
Periodically apply a drop of oil only to the
areas indicated after cleaning.
REMOVING BOBBIN CASE
REPLACING BOBBIN CASE
Raise
needle,
open
slide
plate,
remove
needle plate and lift out bobbin.
Turn bobbin case holder
A
to back as far
as it will go.
Lift out bobbin case
B.
Insert bobbin case with a back and forth
motion, so that front of the case is under
the position plate
C.
Turn holder all the
way forward to lock bobbin case.
Replace needle plate and close slide plate.
38