Appliqué, Applications – SINGER 6105 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

APPLIQUÉ
Appliqué adds beauty and interest to clothing and household linens. You can create your own
design, trace a simple outline from a colouring book, or use a motif cut from a printed fabric.
Fabrics of similar or different textures combine equally well.
A closely spaced plain zig-zag stitch is used for appliqué work. Although you may vary stitch
width to accommodate fabric weave and texture, never allow the stitch to be too wide.
Make a test sample to help you decide which of the following methods is best for your fabric
and design.
applications
Pattern Group Selector: /
j.
®
Needle Position:
® Stitch Width: To suit fabric
® Stitch Length: Between 0 and 1
© General Purpose Needle Plate
® Special Purpose Foot
Preparation
® Baste appliqué design to fabric and outline
the design with a short straight stitch.
® Remove basting and press.
Method 1 = Trimming after Stitching
® Set machine as code recommends.
® Outline the entire design with appliqué
stitching.
® Cut away the fabric or the outer edges of
the stitching with embroidery sci^ssors.
Method 2 - Stitching after Trimming
® Trim outside fabric edges close to straight
stitch outline of design.
® Set machine as code recommends.
® Overedge the design with appliqué stitching.
This step will produce a smooth, lustrous
finish that requires no additional trimming.
22