Chapter 7. twin - needle stitching – SINGER 6105 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 7. Twin - Needle Stitching
Procedure
The
twin-needle
simultaneously
produces
two
parallel, closely spaced lines of pattern stitch
ing. You can stitch with either one or two col
ours of thread.
• Pattern Group Selector: Stitch desired
• Needle Position:
• Stitch Width:
]
^ |
• Stitch Length; . 5 - 4 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot or Special Purpose Foot
X; J* only
^ ^ only-^
Insert twin-needle.
Thread as for single-needle stitching, and
through right eye of needle.
Attach detachable spool pin, with felt, in hole
on top cover.
Place spool of thread on detachable spool
pin and thread machine in usual way.
Thread through remaining points, making cer
tain to omit the thread guide above the needle
and pass thread through left eye of needle.
A
CAUTION: Do not use a stitch width greater than what is recommended. A wider stitch will result In needle breakage.
35