The adjustable cording and zipper foot, Sewing in zipper – SINGER W616 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
40
THE ADJUSTABLE CORDING
AND ZIPPER FOOT
This attachment is used to make and
insert covered cording, and to sew in
zippers.
Loosen
thumb
screw
to
slide
foot to either right or left of needle.
CORDING. Fold bias strip of fabric
over cord. Loosen thumb screw and
set foot so needle is centered in needle
hole. Machine baste cord in place
(Fig. 78 ' 80).
To sew covered cord to material, reset adjustable
foot so needle stitches closer to cord, and on edge
of base fabric.
SEWING IN ZIPPER
Loosen thumb screw and slide foot so needle enters
center
of
needle
hole.
Guide
metal
of
zipper
along
edge of foot (Fig. 80). Stitching should be close to
zipper to allow easy opening and closing. Adjust to
sew from either right or left side, whichever is more
convenient.
F ig . 8 0