The set of hemmers, Hemmer set – SINGER W616 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE SET OF HEMMERS

Before attacfiing any of the hemmers, be sure bob

bin thread is pulled up. Then, with hemmer in place,

hold top thread loosely and turn handwheel one full

turn toward you, making a loop under hemmer. Grasp

bobbin thread with both hands and slip horizontal

ly under hemmer toward back. Bobbin thread will

catch loop and carry upper thread to back of hem

mer.

Fold material to suit for two inches along edge,

hold at each end of fold. Slip fold into guide and

up over spoon (Fig. 71 ). Fold hem in material back of hemmer.

and fasten with point of needle. Pull on threads gently as you start stitchi

Fig. 71

Draw forward to end of hem

ing.

HEMMER SET

You can make a hem

, %,

in width, depending upon which

hemmer you use. For a few of the many uses see Figs. 72, 73,

and 77