Positioning stud, Page 17), Page 14) – SINGER 414 User Manual
Page 54: F y j, Remove bobbin, And open slide plate (see
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO REMOVE AND REPLACE BOBBIN CASE
’■
V;.
\
••V '^.•
5
'/.%
' ' ' '
r . v ' ?
III''" i
t r
^1 / r
/v<
l;
( f y j ^
" -----------------------------------
V' - 4?^
V.
\\ ' '■>'
V^X ’x
'X V
$1
i. ^/'
wV
S^s..
^ <•
.r
„,
4
‘/
remove bobbin
Positioning
stud
To clean hook raceway,
case as follows —
• Remove throat plate (see
page 17)
and
open slide plate (see
page 14).
• Unlock bobbin case by lifting and pull
ing holder to right as shown.
• Remove bobbin case from machine.
• Remove all lint, fluff, loose thread ends
or any other foreign matter which
might clog the machine.
v
•
Replace bobbin case so that groove
under, tension spring fits on hook race
way and fork of case straddles positioning stud.
• Push bobbin case holder to left until it snaps down into lock position
• Close bed slide and replace throat plate.
52