The ruffling blade, The separator guide, Preparation – SINGER 414 User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE RÜFFLER

Activating Parts. The ruffling blade and

the separator blade

are of blue steel and

hold the material to be gathered between

them.

The ruffling blade

forms the gathers

or pleats by carrying the fabric to the

needle according to the spacing and full

ness to which the ruffler is adjusted.

The

separator guide

is slotted to guide seam

edges evenly and to separate the ruffle

strip from the material to which the ruffle

is attached.

•

Set adjusting lever on Number 1 set

ting and throw adjusting finger out of

action.

•

Turn adjusting screw for amount of

fullness desired and set stitch length

to space fullness. For maximum full

ness, turn adjusting screw in to its

limit; turn outward for less fullness.

Gathering —

Preparation —

• Raise needle to its highest point.

• Locate attachment on machine in place

of regular presser foot, at same time

fit fork arm over needle clamp screw.

Make sure both presser bar screw and

needle clamp screw are tightened secu

rely.