Page 52, Pages 53, 54, When stored – SINGER 414 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO CLEAN THE MACHINE
Clean
and
Oil
Clean
between
tension
discs
When in regular use —
The machine should be cleaned perio
dically to remove the lint and fluff which
may have accumulated around the work
ing parts. To clean the bobbin case area,
see instructions for removing and re
placing bobbin case on
page 52.
Oil the
machine after each cleaning as instructed
on
pages 53, 54
and
55.
When stored —
If the machine is to be stored away for
an indefinite period of time, a thorough
brush-cleaning to remove all traces of lint
and fluff, followed by swabbing of all
exposed parts with the lint-free brush
saturated with SINGER* Oil, is necessary
to protect the machine against rust da
mage. The areas that should be cleaned
and covered with a protective coat of oil
are shown in the illustration at the left.
51