Four.step buttonhoung (contu), Changing stitch density – SINGER 6110 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FOUR.STEP BUTTONHOUNG (ContU)

Step 3: Bar Tack

Raise the neeciie above the fabric.

Turn buttonhole dial clockwise to step
3. Take at least four stitches ending
at point D.

Step 4: Side Stitching

Raise the needle above the fabric.

Turn buttonhole dial clockwise to step

4. Stitch until the side stitching meets
the bar tack at point E.

CHANGING STITCH DENSITY

Stitch density on left and right sides of the buttonhole may be balanced by using the

stitch balance dial. Use the stitch balance dial to obtain simitar, stitch appearance on

either side of the buttonhole.

To change the density on either side of the buttonhole follow the procedure below.

Return the balance dial to its neutral position after buttonhole sewing is completed.

THEN DO THIS

RESULT

Stitches on the

loH

side are

too far apart

Similar stitch

appearance on

either side of

the buttonhole