SINGER 6110 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Now that you have wound the bobbin and threaded the needle, raise the bobbin thread

through the hole in the needle plate.

RAISING THE BOBBIN THREAD

1. Hold needle thread tightly with left hand

and turn hand wheel slowly toward you

so that needle enters needle plate.

2. Continue turning hand wheel and hold

ing needle thread until needle rises and
brings up bobbin thread in a loop.

4. Place both needle and bobbin threads

under the foot and draw them to back
of machine.