Adjusting needle thread tension, Adjusting stitch length, Adjusting presser foot pressure – SINGER 6110 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ADJUSTING NEEDLE THREAD TENSION
Zig-zag stitching requires less needle thread
tension than straight stitching.
Make a test sample with the fabric and thread
you plan to use so that you can adjust the
tension properly. The stitches should lie flat
against the fabric without causing the fabric
to pucker.
If the stitches are not flat and the fabric is
puckered, lower the needle thread tension by
turning the dial to a tower number.
ADJUSTING STITCH LENGTH
Any stitch length setting from 1 to 4 will give
you an open zig-zag stitch.
The higher the number, the more open, or
farther apart your stitches will be.
The area between 0 and 1 on the dial, is used
for the adjustment of zig-zag satin-stitching, a
series of closely spaced plain zig-zag stitches
that form a smooth, satin-like surface. (Refer
to page 21 for information on satin stitching).
1
2
3
stitch Lengih Setting
ADJUSTING PRESSER FOOT PRESSURE
See page 15 under « Straight Stitching ».
20