Slant overedge stitch no. 7 – SINGER 6610 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Slant overedge stitch

no. 7

Seams in knitted and stretch fabrics can be
joined and finished in one operation when
you use the slant overedge stitch.

• Baste the garment together on the seam

line allowing for a 5/8" seam allowance
and fit in the usual way.

Required settings

Stitch Selection;

Slant Overedge no. 7

Needle Position;

Stitch Width;

Stitch Length;

At dot (•)

Foot;

General Purpose (B)

Needle Plate;

General Purpose (A)

After making any adjustments, trim the

seam edge evenly to a 1 / 4" from the seam
line basting.

Place trimmed seam under the foot so that

the straight stitches fall on the basted seam

line and the zig-zag stitches fail over the
seam edge.