Zig-zag stitch no. 4, Seam finishing, Satin stitching – SINGER 6610 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

J
Zig-zag stitch no. 4
The Zig-Zag Stitch can be used when sewing
seams, appliqueing, monogramming or for
decorative sewing.
Recommended sellings
Stitch Selection;
Zig-Zag Stitch no. 4
Needle Position;
Stitch Width;
Ì
i 1 I 1
Stitch Length.
2-5
Foot.
General Purpose (B)
Needle Plate;
General Purpose (A)
Seam finishing
Use a zig-zag stitch to finish seam edges
of fabrics that are likely to fray.
• Sew seams as desired; trim and press
open.
• Place edge of seam allowance under foot,
as shown,
• Stitch close to edge, letting outer zig-zag
fall over edge of fabric.
Satin stitching
Recommended settings
Stitch Selection.
Zig-zag Stitch no. 4
Needle Position;
UIU
Stitch Width.
: 1 1 I 1
Stitch Length;
Foot;
Needle Plate;
0-2
Special Purpose (J)
General Purpose (A)
Satin Stitching is a series of closely spaced
zig-zag stitches. Satin stitch can be used for
monograms, embroidery and applique work
to produce a smooth satin-like finish.
• Practice to get desired stitch appearance.
Block monogramming
• Lightly trace letters on right side of fabric.
• Centre tracing under needle.
• Stitch entire outline, leaving needle in
fabric when turning.
• Pull threads to wrong side of fabric, tie and
trim.
22