Raising the bobbin thread – SINGER 6610 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Raising the bobbin

thread

Once the needle has been threaded and the
bobbin placed in the bobbin case, the bobbin

thread must be brought up through the hole

in the needle plate.

1. Hold needle thread loosely with left hand.

• Turn hand wheel slowly toward you,

lowering needle into hole in plate.

2. Continue to do this until needle rises

above needle plate.

• Pull gently on needle thread and bring

up bobbin thread in a loop.

3. Open loop with fingers to find end of bob

bin thread.

4. Draw needle thread through left side

opening in presser foot.

•

• Pull both threads to back of machine.