Flexi stitch patterns, Flexi stitches, Stitch pattern selector – SINGER 6610 User Manual
Page 33: Flex! stitch patterns
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. FLEXI STITCH
PATTERNS
In addition to straight and zig-zag stitches,
your machine can produce a variety of other
patterns.
Flexi stitches
These stitch patterns are used for sewing
knits and other stretch fabrics. Flexi Stitch
patterns are made by the side to side
movement of the needle along with the
backward and forward movement of the feed.
Stitch pattern selector
Raise the needle to its highest position.
Set the stitch width selector to the straight
position ( I ). (This allows the pattern
selector to be moved easily).
Slide the pattern selector under the center
of the desired pattern grouping.
Turn the stitch length dial to the left until
the dot ( • ) on the dial lines up with the
dot ( « I o n the machine, as shown.
Note: If for any reason the machine does not
start sewing your desired pattern after
aligning the two dot symbols, push-in on the
reverse stitch button.
28