Iliil i i mil i ■nil – SINGER WSL2000 (Part 1) User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Iliil I I Mil I ■nil
NARROW AND ROLLED HEM, PICOT STITCH
Narrow and rolled edge is ideal for use on thin materials such as georgette crepe, crepe de chine,
silk etc.
Also, picot stitch can be produced particularly when sewing on fine 'scarflike' materials.
In view of the nature of these hems, they are unsuitable for use on 'hard' or 'heavy' materials.
1. R aise the presser foot.
2. Open the front cover and working table.
3. Remove the stitch finger from the needle plate by screw driver and keep it in the accessory
bag.
4. Set the machine according to page 28.
NOTE: 1. Please use following recommended thread for making ideal seams.
2.
After finishing, re-set the stitch finger in its place. Please ensure inserting it deep as
illustrated in Fig 1.
RECOMMENDED THREAD
Narrow overlook edge
Rolled edge
with Three Threads
with Three Threads
Thread for needle
Polyester, Nylon, Silk No. 50-100
Nylon No. 100
Upper looper
Polyester, Nylon, Sifk No. 50100
Bulk nylon (less stretchable)
Bulk nylon (less stretchable)
Lower looper
Illustration * I : Stitch finger (A)
* n : Narrow hem
* n : Rolled hem
* IV : Picot stitch
34