SINGER W2031 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. la
Fig. 19
is.
IJrtfp* Fefetf'Dial
By using the drop feed dial you may adjust the feed dog for sewing different
tyix of material and for embroidering or darning (Fig. 20).
1. For sewing very light fabric, move indicator to “SILK” for heavier favric to
“NORM”.-
2.
When the indicator is at the “EMBR” position, the feed dog will be lowered
below the surface of the needle plate.
This is embroidering and darning, and you will be able to move your work
freely about in any direction you choose.
3.
For embroidering and darning, first reduce pressure of presser foot (Fig. 18).
( 10 )
t4. To
Oil
Sewing Machine
Fig. 21
To see that your machine is always in smooth running condition you must keep
it oiled at ail times. No greas is required. Just a drop of oil is sufficient at each
time of oiling. Points to be oiled are illustrated in Fig. 21. To oil your machine
thoroughly, it will be necessary for you to remove the small cover plate on top of
the arm. Turn the machine over to get to parts underneath the bed.
After-oiling, run the machine at high speed for a few minutes to get oil to penetrate
to air’parts.
( 11 )