SINGER 3214 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning Shuttle Case
Thread stuck between shuttle and shuttle case
many cause your machine to stop running.
In this case you shouid proceed as follows:
® Lift presser foot and remove bobbin case.
@ Push latches (a) towards outside and remove
shuttle cover and shuttle with finger.
® Clean shuttle and case and reassemble.
Changing Light Bulb
Unplug the machine.
Remove the screw ® on face cover as shown.
Remove cover.
Remove bulb by unscrewing it counterclockwise.
Replace with is 15 watt bulb.
Install a new bulb by screwing it in clockwise.
Replace cover.
This manual is related to the following products: