SINGER 3214 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Raise presser foot.
2. Set take-up lever to the highest position by
turning handwheel towards you.
3. To locate spool pin, open stitch panel over. Lift
cover with thumb and flip open to full extended
position.
Lower carrying handle if necessary.
4. Pull spool pin towards you and place a spool of
thread on pin.
5. Slide spool cover onto spool pin, as illustrated
and replace to original position.
Threading Upper Thread
Use the large spool cover for larger spools and
use the small cover for smaller spools.
* If you use small spool cover for bigger spool,
upper tension may be unbalanced and, some
times, will cause skipping or thread breakage.
Thread, machine in accordance with instructions
on next page, following steps © ~ ©.
-
8
-