SINGER 3214 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Embroidery
Set machine as shown.
Remove presser foot and shank.
To avoid lower thread being pulled up, reduce
upper thread tension.
Pull up lower thread by turning handwheel towards
you while lightly, holding upper thread.
Lower presser foot lever.
Grasp lower thread then make two or three stitches,
snip off excess threads.
Start sewing along outline of design with satin
stitch.
Continue sewing while guiding hoop by hand.
To finish sew several stitches with zigzg width at 0°.
Use lightweight paper underneath when embroider
ing sheer fabric.
-
38
-
This manual is related to the following products: