SINGER W1366 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

20
(7) Set buttonhole control at number 2 position for bar tacking.
Sew four or five stitches, step 2.
(8) Set buttonhole control at number 3 for right hand side of buttonhole.
This will set the machine to sew in reverse. Sew right hand side of
buttonhole, step 3.
(9) Set buttonhole control at number 4 position for bar tack. Sew four or
five stitches, step 4.
(10)
Set buttonhole control at 0 position and take two or three stitches to fasten
bar tack to prevent ravelling.
( 1 1 ) Cut the buttonhole opening with seam ripper, being careful not to cut the
stitching.
Fig. 33
If
you plan to make buttonholes on
sheer or soft material, place tarlatan
or
paper under fabric which can be torn
away after stitching.
When making additional buttonholes
be sure to turn the buttonhole control
knob to 0 and back to the number 1
position to put the machine in forward
stitching.