SINGER W1366 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

B,op .eea, set sUtcH «a,K
:Si“'Lo“i b°; IL»l: Stch „idtb at 0 and tabn>a 3 or 4 atttches in canter of deai^.
embroidering
with
a
hoop
It is easy to follow a stamped design or to
work free hand when embroidering or mronogram
ing. (See Fig. 29). Release the pressure from
the foot by pressing down on the snap locx ring
darner. Push the drop feed button down all the
Stretch the fabric in an embroidery hoop, and
place under the needle alter removing the presser
foot. Set the stitch width at the size you prefer
and lower the presser bar lifter. Then operate the
the needle.
fabric is not stretched tight enough or a darning spring
, aee«^L°: :r"«Sabi: .ron. you. deaie. illusdated in the bad of ihi, boo«,
darn
or
monogram
without
hoop
f»mbroidery hoop, leave zigzag presser foot in
If you wish to dam or
^
length at 0, , set zigzag stitch width to suit,
place, release all pressure on presser foot, set stitch iengm ,
and leave feed in sewing position. ^
tUp fabric must be held taut or skipped
When darning or monogramlng in this manner, the labno mus
stitches will be encountered.
xy