Straight stitching – SINGER W1366 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

13
STRAIGHT STITCHING
For straight sewing on fine fabric or very soft ma
terial, you may want to use the straight stitch presser
foot and the straight stitch needle plate which are in
cluded in your accessory box. Both have narrow needle
slots.
Changing the Presser Foot and Needle Plate :
(1) Presser Foot
(A)
Loosen thumb screw (19, Fig. 1) and
remove zigzag presser foot.
(B)
Replace with straight stitch presser foot.
Fig. 22A.
(2) Needle Plate
22-A
(A)
Slide cover plate (17, Fig. 1) to the left as
far as possible.
(B)
Remove screws holding needle plate (16,
Fig. 1) to bed plate.
(C)
Remove zigzag needle plate.
(D)
Replace with straight stitch needle plate
22B.
Be sure the machine controls are set as follows or you
will break the needle.
(1) Buttonhole control knob A, set at 0
(2) Zigzag Stitch Width control knob "B", set at 0
(3) Decorative Stitch Design Dial at Manual (EXTREME LEFT)
Fig. 22-B
Fig. 23