SINGER W166 - Manual (Page 39)

THE ADJUSTABLE CORDING
and ZII’PER FOOT
'riiis attachment is used to make and
insert covered cording, and to sew in zippers.
Loosen thumb screw to slide foot to
either right or left of needle.
CORDING. Fold bias strip of fabric
over cord. Loosen thumb screw and set foot
so needle is centered in needle hole.
Machine baste cord in place (Fig. 48).
lo sew covered cord to material, reset
adjustable foot so needle stitches closer to
cord, and on edge of base fabric.
57
3 i, J 7
Fig. 48
SEWING IN A ZIPPER
Loosen thumb screw and slide foot so needle enters
center of needle hole. Guide metal of zipper along edge
of foot (Fig. 49). Stitching should be close to zipper
to allow easy opening and dosing. Adjust to sew iron
either right or left side, whichever is more convenient.
Fig. .19