Now to – SINGER W166 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE SET OF HEMMERS

Before attacliiiig any of the hemmers, be sure bobbin thread

is pulled up. Then, with bemmer in place, bold top thread loosely

and turn handwheel one full turn toward you, making a loop

under bemmer. Cirasp bobbin thread with both hands and slip

horizontally under bemmer toward back. Bobbin thread will catch
loop and carry upper thread to back of bemmer.

bold material in

1/8

inch for two iticbes along edge, bold at

each end of fold. Slip fold into guide and up over spoon. (Fig. 43).

bold hem in material back of bemmer. Draw forward to end

of hem and fasten with point of needle. Pull on threads gently as
you start stitching.

Fig. 4.-i

DARNING SPRING

now TO

ATl'ACn

Remove presser foot, unthread needle, place darner spring,

on needle and slip book up over bub on needle clamp.

PATCHING AND MONOGRAMMING

See page. No. 18 Fig. 44.