Bund hems – SINGER W166 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BUND HEMS

C O M I > L E T E r

Prepare the garment in the same manner as for hand hemming.

Step 1. (Fig. 24) If hem with folded edge is used make first fold 3/8" deep.

Step 2. Turn hem the depth desired and baste 1/4" from upper edge. Press into place.

Step 3. Fold hern back toward right side of garment leaving 1/4" extended.

Step 4. Place material under presser foot and sew blind hem automatically.
Blind hem completed.

Turn automatic pattern selecting dial counterclockwise so that Blind Stitch | section of the

dial comes to the red triangle mark on the zigzag plate.

Set needle position to LEFT and stitch length regulator to M.5.

The blind „¡ich .1 CENTER ,,r RIGHT needle pnsilinn |,

reenm„,e,„l„l bee,,,,,,, n,,,

often tends to break the needle.