SINGER W1213 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I. Feattires and Parts
Principle Parts
Picture Window
pictures the stitches and allows for easy selection.
Descriptive Tension Dial
regulates the amount of tension on the needle
thread.
Take-Up Lever
regulates the flow of thread throu^ the needle.
It has an open-slot to simplify threading. The take
up lever should always be in its highest position
when beginning or ending sewing.
Face Plate
opens to the left. Allows easy changing of the
light bulb.
Check Spring
helps control the flow of thread through the
needle.
Needle Clamp Screw
holds the needle in place.
Thumb Screw
holds presser foot in place.
Diamond Point Feed Dog
moves the fabric after each stitch is formed. The
diamond points give a gentle feed for delicate
fabrics as well as an accurate feed for heavy
fabrics.
Presser Foot
holds the fabric in place for sewing. Various feet
are given in the accessory box.
slides open for changing the bobbin.
Slide Plate
Needle Plate
has guide lines on the left and right for greater
sewing accuracy.
Presser F oot Lever -
controls the raising and lowering of the presser
foot. It has an extra lift for the placement of
heavy fabrics.
Thread Cutter-
is located on the back of the presser bar for
convenience.
Spool Pins and Caps
hold aU types of spools effectively and eliminates
over-spin of lightweight spools.