SINGER 15-91 - Manual (Page 45)

Pull the binding through under the presser foot
before starting to sew. Note that as the binding
passes through the scroll of the Binder the edges are
turned in.
43
F ig . 41. I nserting B inding in B inder
Binding May be Purchased Cut and Folded
for Use with the Binder
Folded bias binding
may be purchased for
use with the Binder.
The binding comes in
a variety of materials
and c o l o r s . F o l d e d
bindings for use with
the Binder must meas­
ure
Yi' in width. The
No. 5 width in stand­
ard brands usually measures
Yi", but it is always
well to be sure of this before purchasing.
Folded binding is inserted in the outside slot of
the Binder, as shown in Fig. 42. The Binder is
adjusted and operated in the same manner as when
using unfolded binding. One-half inch braid or
ribbon may be used in the same manner.
A binding inserted in the outside slot of the Binder
will be turned only once. It is therefore necessary
to have finished edges when using binding in this slot.
F ig . 42. I nsert F olded
B inding in O ut ­
side S lot