Instructions for using the attachments – SINGER 15-91 User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTRUCTIONS FOR USING THE

ATTACHMENTS

The Foot Hemmer

The Foot Hemmer (Fig. 32)

is attached to the machine in

place of the presser foot. Raise
the needle to the highest posi
tion, loosen the thumb screw
which clamps the presser foot to

the presser bar and remove the
presser foot. Attach the Foot

Hemmer to the bar, taking

care to tighten the screw firmly

so that the Hemmer will not

become loose when the machine

is running. Turn the balance

wheel slowly to make sure that the needle goes
through the center of the needle hole and that the

lower thread is properly pulled up.

TZ9_Z#J

. 32. T

oot

emmer

How to Start the Hem at the Very Edge

How to start the hem at the very edge of the

material is of great importance in learning to use
the Hemmer. If the hem is not started at the edge

and the material is pulled bias a perfect hem cannot

be made.