SINGER 14ET754 - Manual (Page 33)

2) 2-Thread standard rolled hem stitching
Note; * These are suggested tension settings only.
+ Tension settings are effected by;
1) Type and thickness of fabric
2) Needle size
3) Size, type and fiber content of thread
* See page26 to converting the upper looper
into spreader.
Correct Balance_____________________________
• Set Each Tension Dial to Settings Shown at Right
and Test Sew on a Sample of Your Fabric
How to Balance
• When the lower looper thread is botton side of the
fabric.
- Turn the lower looper thread tension dial(yellow)
toward a higher number.
- Or, turn the needle thread tension dial (blue or
green) toward a lower number.
• When the needle thread tension is too loose;
- Turn the needle thread tension dial (blue on green)
toward a lower number.
- Or, turn the lower looper thread tension dial (yellow)
toward a lower number.
NEEDLE POSITION
SEAM WIDTH FINGER KNOB
STITCH LENGTH
SPREADER
2-4
USE
Lower looper
thread
Topside
(503)
Fabric
Tension Dial
Blue Green Orange Yellow
Light weigt 0 Spreader 5.0
Medium weight 0.5 Spreader 5.0
Heavy weight 1.0 Spreader 5.0
Fabric
Tension Dial
Blue Green Orange Yellow
Light weigt 0 Spreader 5.0
Medium weight 0.5 Spreader 6.0
Heavy weight 1.0 Spreader 6.5
Lower looper
thread
Topside
Needia thread
Underside
Lower looper
thread
Topside
31