SINGER 14ET754 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

18. CONVERTING THE UPPER

LOOPER INTO SPREADER

Warning:

Switch off the machine before installing
or removing the spreader.

Installing the spreader

Insert the pin (A) of the spreader in the

hole (B) of the upper looper.

Put the positioning rib (C) in contact

with the upper surface of the looper.

Insert the point (D) in the hole (E)

of the upper looper.

Removing the spreader

• Remove the point (D) of the hole (E)

of the upper looper and take the
spreader off the looper.

Note: Put the spreader back to the

accessory storage.