Stretch overedge, To set the differential feed adjusting lever – SINGER 14ET754 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Stretch Overedge

stretch overedge is ideal for sewing decorative

collars, sleeves, skirt hems, etc. on loosely knit and

woven fabrics.

To set the differential feed adjusting lever

• Set differential feed adjusting lever knob above

graduation "1.0".

To sew a seam, apply gentle tension to the fabric

by holding the seam lightly in front and back of the

presser foot.

Note: * If amount of “stretch" is not correctly set in

relation to the fabric being sewn, the fabric

is apt to shift away from the needle

resulting in improperly sewn overedge

seam. In such case, reset differential feed

adjusting lever closer to the center mark.

* Be sure to reset the differential feed

adjusting lever to graduation "1.0" for

normal overedge stitching.