SINGER W102 - Manual (Page 24)

FRENCH SEAM (FELLING)
Proceed in the following manner;
1- Lay two pieces of cloth one on top of the other with their
RIGHT sides facing each other. The right edge of the bottom
piece must extend about 1/8 inch beyond the right edge of the
top piece. See (Fig. 24).
1 Sew both pieces of cloth together. Use the right edge of long
toe of hemmer foot to guide the botton, piece of „ateri.l. while
the left edge of the same toe serves
as a guide for the top piece of
material. (Fig. 25).
Open and spread out material and
put back on machine right sides
down-ward. Make sewn edges of
material stand up.
Fold over the edges to the left and
insert them into the scroll of the
hemmer foot. Sew as you would
do ordinary hemming. Use left edge
of long toe of hemmer foot as guide,
having orgmal seam run alongside
3.
4.
of it.
TOP PIECE
BOTTOM PIECE
1ST STEP
« ' I D T H O K l O F
2ND STEP
21